At a Brisbane bond inspection the property manager walks through with your entry condition report and checks cleanliness and damage room by room. The items that fail most often are the oven and rangehood, window and door tracks, bathroom grout and exhaust fans, marks on walls and doors, skirting boards, the inside of cupboards, and outdoor areas.
The final inspection at the end of a lease usually takes a property manager well under an hour. In that time they compare the property to the entry condition report and decide whether anything needs to come out of your bond. Knowing where they look means you can put your effort where it counts.
These are the areas Brisbane property managers look at most closely, and the small details that most often lead to a re-clean request.
How the inspection works
After you hand back the keys and your exit condition report (Form 14a), the property manager walks through with the entry condition report from the start of your lease. They're checking two things:
- Cleanliness: is the property as clean as it was when you moved in?
- Damage: is there anything new that goes beyond fair wear and tear?
Most agents work room by room, and most have their own checklist. The items below appear on nearly all of them.

Kitchen: where most re-cleans start
- Inside the oven, including the glass door, the racks, the grill and the roof of the oven. Agents open it every time.
- Rangehood filters. Grease build-up is visible as soon as the filter is pulled out.
- Stovetop, including under removable trivets and around the knobs.
- Inside cupboards and drawers, particularly the corners and drawer runners.
- Dishwasher filter and door seal, if there is one.
- Splashback and grout lines behind the stove.
Bathrooms and toilets
- Shower screen: soap scum and water spots show up under the bathroom light.
- Grout and silicone: mould in corners and along the base of the shower.
- Exhaust fan cover: dust is easy to spot from below.
- Toilet: under the rim, the base and behind the bowl.
- Vanity drawers, mirror and tapware: fingerprints and water marks.
- Floor waste drains: hair and build-up.
Living areas and bedrooms
- Walls and doors: scuffs, finger marks around light switches, and Blu-Tack residue.
- Skirting boards and architraves: dust along the top edge.
- Ceiling fans and light fittings: dust on the blades and dead insects inside light covers.
- Wardrobes: inside the shelves, the tracks of sliding doors and the floor of the robe.
- Carpets: stains and, for pet-friendly leases, whether professional carpet cleaning was a condition of the pet approval.
- Air-conditioner filters on split systems.
Windows, tracks and blinds
Window and sliding door tracks are one of the most common items on a re-clean list. Dirt and dead insects collect in the corners, and they're right at eye level when an agent checks the windows. Agents also check fly screens, window sills and blinds (each slat, both sides).
Outside areas
- Balcony or patio swept and wiped down, including the railings.
- Garage or carport swept, with any new oil stains noted.
- Cobwebs removed from eaves, doorways and outdoor lights.
- Lawns and gardens, if yard upkeep was your responsibility under the lease.
- Bins emptied and rinsed.
The small things that catch people out
These rarely take long to fix but come up on re-clean lists again and again:
- The top of the fridge space and the floor where the fridge stood.
- Light switches and power points.
- The inside of the microwave, if it stays with the property.
- Door handles and the tops of doors.
- The washing machine space and the laundry tub.
- Smoke alarm covers (dust only; don't remove them).
Cleaning vs fair wear and tear
Cleaning is always your job, but normal wear from living in a property isn't. Faded curtains, light traffic wear on carpet, or paint that has dulled with age are typically fair wear and tear. Burns, large stains, holes in walls, or pet damage usually aren't. If you think an item on the agent's list is wear and tear, say so in writing and point to your entry report and photos.
Make the inspection a formality
The simplest approach is to clean to the same standard the agent inspects to. Our bond cleaning checklist covers every item above, room by room. If you'd rather hand it over, ECO Cleaning Brisbane's bond cleaning service works to that checklist, includes one standard oven clean, and comes with a 7-day bond back guarantee. Prices are fixed by property size; see bond cleaning prices in Brisbane.
For the full end-of-lease process, including notice, rent and repairs, read how to get your full bond back.
Frequently asked questions
Can I be at the final inspection?
You can ask to attend. Many agents inspect on their own, so take your own photos of every room before you hand back the keys.
What happens if something fails the inspection?
The agent usually asks for a re-clean of specific items. Fix them quickly; our guide to what to do after a failed bond inspection explains the steps.
Do agents check inside cupboards and the oven?
Yes. Cupboards, drawers, the oven, rangehood filters and the dishwasher are opened at most inspections.