Clean the bathroom from top to bottom: exhaust fan and light covers first, then walls and tiles, the shower screen and tracks, the vanity and mirror, the toilet, and the floor last. Soak soap scum with a bathroom cleaner or a vinegar and dishwashing liquid mix for 10 minutes before scrubbing, treat grout and silicone for mould, and dry the glass to stop water spots.
Bathrooms take longer than they look. Soap scum on glass, mould in the grout and a dusty exhaust fan are three of the items that most often turn up on a re-clean request. With the right order and some soaking time, you can get most bathrooms to bond standard without harsh chemicals.
What you'll need
- Bathroom cleaner, or white vinegar plus a few drops of dishwashing liquid in a spray bottle
- A mould remover for grout and silicone (ventilate the room and wear gloves)
- Non-scratch scourers, a grout brush or old toothbrush, microfibre cloths
- A squeegee and a dry cloth for glass
- A step ladder for the exhaust fan
Never mix bleach-based mould removers with vinegar or other cleaners. Use one, rinse, then the other.
Step by step
- Exhaust fan and light covers. Turn the power off at the switch, then remove or vacuum the fan cover. Wash it in warm soapy water and dry it fully before refitting. Wipe light covers and any cobwebs in the cornices.
- Spray and wait. Spray the shower screen, wall tiles, taps and bath with your cleaner and leave it for 10 minutes. Soaking does most of the work on soap scum.
- Walls and tiles. Scrub tiles from the top down with a non-scratch scourer, then rinse.
- Grout and silicone. Brush grout lines. For black mould spots, apply a mould remover, leave it for the time on the label, and rinse. Mould that's deep in old silicone may not come out fully; tell the agent rather than cutting it out yourself.
- Shower screen and tracks. Scrub both sides of the glass, then the bottom track and the door seal. Use an old toothbrush in the track corners. Squeegee the glass and buff it dry so no water spots form.
- Taps, shower head and drain. Polish tapware with a dry cloth. Pull hair out of the drain and wipe the grate.
- Vanity and mirror. Empty and wipe the cupboards inside, the basin, the overflow hole and the splashback. Clean the mirror last in this area with a barely damp microfibre cloth, then a dry one.
- Toilet. Clean the bowl and under the rim, then the seat on both sides, the hinges, the cistern, the button and the base where it meets the floor. The back of the pedestal is often missed.
- Floor. Vacuum or sweep, then mop, paying attention to the corners and behind the toilet. Leave the door and window open to dry.

Hard water and soap scum that won't budge
Brisbane water isn't especially hard, but years of build-up still leave a white film on glass. Warm white vinegar left on for 15 to 20 minutes (held on with paper towel on vertical glass) softens it. Avoid steel wool or abrasive powders on glass and chrome, which leave scratches that can be recorded as damage.
What agents check in the bathroom
- Shower screen glass against the light
- Grout, especially corners and the base of the shower
- Exhaust fan cover and the light fitting
- Inside the vanity cupboards and drawers
- Toilet base, hinges and behind the cistern
- Drain grates and the bath overflow
For the whole house, see what real estate agents check at a bond inspection.
Mould in a humid Brisbane bathroom
Summer humidity and internal bathrooms with no window are a recipe for mould on ceilings and silicone. If mould has come back quickly despite cleaning, it may be a ventilation problem the landlord is responsible for under Queensland's minimum housing standards. Read removing mould before the end of your lease.
How long it takes
An average rental bathroom takes one to two hours to clean to bond standard. A neglected one with heavy soap scum can take three or more. If you have two bathrooms and limited time, a professional clean is worth pricing. Our bond cleans cover every bathroom, with fixed prices on the bond cleaning prices page and a 7-day bond back guarantee.
Frequently asked questions
What's the best way to remove soap scum from a shower screen?
Spray it with a bathroom cleaner or a mix of warm white vinegar and dishwashing liquid, wait 10 to 20 minutes, scrub with a non-scratch pad, rinse and dry with a squeegee and cloth.
Do I have to replace mouldy silicone when I move out?
Not usually. Clean it as well as you can. If the mould is deep in old silicone, that can be wear and tear or a maintenance issue, so mention it to the agent rather than removing it yourself.
Should I clean the exhaust fan for a bond clean?
Yes. A dusty exhaust fan cover is one of the most common re-clean items. Switch the power off before you remove the cover.